Super a parts/steering

Mark W.

Member
Do they sell a kit to "rebuild" the steering box, just the bearings,
seals, and gaskets, or do you have to buy each? Is it a big job
installing them. Where do you all recommend getting parts from? I
need axle pan gaskets and possibly a new axle pan as well. I know
Case/Ih has many parts but I am looking for other options.
Appreciate any input.
 
With the bearings and seals most of the time ya can get them from bearing supply houses but as for the gskt's that is for the most part on the chassis A dealer only part . As for me i would rather pay Case I H then spend time running around tryen to find parts as time was money and running all over the place put ware and tare on my truck . Then if the parts that i was looking for were no longer made then we would start hunting for the parts thru people that i knew.
 
Use the phone number and call him, avoid Ebay. I got the set from him awhile ago and one part, seal I think was wrong. Phoned him and he sent the right one the next day.
Marshall Tractor Parts Cynthianna? Kentucky $52
 
I get the bearings and the two bushings from the dealer and the seals from Car Quest. You need two bushings,two bearings and two seals i make my gaskest from gasket material. You will also want to replace the key as i mite also be worn. Then fill with 9o wt and they will steer like new. You should use a calipers on the ball ends and i use a disc grinder to make them round again. When done it will be like new again.
 
I just today purchased 2 bearing's 2 bushing's 2 seals and 2 keys and gasket from a Case/Ih dealer.They nailed me for $112.01.But the parts are the correct ones.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top