Haban Belly Mower

Anonymous-0 · Jan 13, 2009

Will a Haban 61" belly mower fit on a Farmal A?

Janicholson · Jan 13, 2009

If no one else answers, I will say yes. All projects require either adapters, or enginuity and a welder to get done. We do not know for sure what can be done. Google the company, and see if they make/made a model to fit it. If so there are possibly parts to adapt it. Other wise you are on your own. JimN

Clefus · Jan 13, 2009

I have been using a friends pto corn sheller made by Haban...out of Racine I think....couldnt find much info about the company...any body else have one of these shellers??

mkirsch · Jan 14, 2009

Never heard of the company myself, but as has already been said, anything can be done with a welder, cutting torch, scrap metal. and a few precision parts. If you have the mower or can get it cheap enough, why not try and see if you can make it work?

Haban is probably one of those small flash-in-the-pan short line equipment manufacturers from the '50s or '60s. Not enough equipment out there or enough of a following for someone to do up a website with company history and technical data. Just orphaned equipment that shows up from time to time in the backs of old farmers' barns.

Hopefully your C has the belt pulley drive, because otherwise you will need about a 18" diameter pulley on the PTO to drive the mower fast enough.

Anonymous-0 · Jan 14, 2009

Company closed when founder died. I looked it up. Bring it over i will make it work. Of course it could be mounted for an A the shop mite charge more than a new woods could be had never know you will have to show it to someone who could build the mounts.

Haban Belly Mower

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Clefus

Member

mkirsch

Well-known Member

Anonymous-0

Well-known Member

Similar threads