Super A oil slinger gear

DWarack · Jan 9, 2009

Looking for sources for after market oiler gear pt. no. 354643 R11 for Super A. Thanks Dan

EZ · Jan 9, 2009

DW,
Are you goin' in?
I'm ripping a 130 apart right now to replace the oil slinger.
Try Chas Richards.
Or Ontario Used Tractors (519)523-4922
Untitled URL Link

Anonymous-0 · Jan 9, 2009

No aftermarket you need to visit a parted out tractor.

banjo · Jan 9, 2009

Well you could look under parts on this site. they list it for $111. and change.

EZ · Jan 9, 2009

Try this.
Untitled URL Link

DWarack · Jan 10, 2009

Thanks for the replies guys. I have my trans. completly tore down.The gear I have has good teeth but the bushing is wore causing it to be noisy.I saw the one on this site and Case IH also has them,but was looking for a better price.Thanks again for the help Dan

EZ · Jan 10, 2009

DW,
You may get a better price from a wrecker. How long did it take you to tear down that tranny? My 130 is up on blocks now. Just have to get the finals off and separate the trans from the tube.

Let us know how you make out.

DWarack · Jan 10, 2009

EZ,It did't take too long. after finals I removed pinion,top shaft and gears then bottom gears.On the lower shaft the front cover comes off after removing 2 bolts and a nut.Look closely the cover and bearing cage seperate on outside of case. I did'nt notice at first and tried to pry both together and wondered why it would'nt go. Also on top shaft you have to remove a pin that goes through a gear.You will have a bare case when done.Let me know if I can help futher Dan

EZ · Jan 10, 2009

DW,

Here's a pic of my tranny today.
Untitled URL Link

EZ · Jan 10, 2009

Here's the pic.

Anonymous-0 · Jan 10, 2009

Dealer wanted $300 + got mine from nnalert $63

Super A oil slinger gear

DWarack

Member

EZ

Member

Anonymous-0

Well-known Member

banjo

Member

EZ

Member

DWarack

Member

EZ

Member

DWarack

Member

EZ

Member

EZ

Member

Anonymous-0

Well-known Member

Similar threads