Farmall Super AV clutch release bearing

APAV · Jan 3, 2009

Ok so I have a Super AV tractor split open and I was going to change the cluch release bearing and bushing while I was in there....I had the parts for a farmall A that I never got around to fixing and I have realized that the they are not going to work. The bearing that is in there looks like its graphite and has some chunks out of the edges of in going in about .125 from the edge. I would assume that it should be replaced. Do you know where you can get new graphite? Is there a bearing you can place inside of the housing?

Thanks

ScottyHOMeY · Jan 4, 2009

The graphite bearing can be replaced with the coonventional type of roller bearing. I know I did on my SuperC. What I can't remember (there's been more of that lately!) is whether I had to get a different carrier and sleeve just for it or if there was enough left to fit the new bearing in.

I don't believe there's a current source for the graphite bearing.

For info, in case you do have to go to salvage to find a bearing carrier, my parts book for the SuperC lists both types of bearing, but the book for the As lists only the roller type. The part numbers for the roller type are the same for both tractors. There are several makes of bearing available, each with its own number, but the carrier number if you should need to find one is 6116.

Farmall Super AV clutch release bearing

APAV

New User

ScottyHOMeY

Well-known Member

Similar threads