rear wheel bolt pattern

rhettcale · Dec 27, 2008

could anyone please inform me of the rear wheel bolt pattern for the A's and B's im trying to find something that will fit my B.F. Avery. since the wheels were butchered by the previous owner. the centers were torch cut out of two sets and welded into semi rims, in an attempt to make dual rear wheels.

Janicholson · Dec 27, 2008

Use a compass and make circles at just about the correct size. Put the closest one in the center of the bolt pattern. and measure the distance to the center of the holes from the edge of that centered circle. add two of that distance to the diameter of the circle (pie tins and such make good circles also) and that is the bolt circle diameter. It will be in no less than 1/4 " increments, but likely 1/5" closest to the measured size. Then count the bolts. (also if an even number going across to center will give diameter) Wheels are given (in many cases) as 8 bolts on 8-1/2" circle. Good luck, JimN

rhettcale · Dec 27, 2008

my bolt circle is 6 on 6-1/2 with a 4-3/4 center hole. what other makes/models have this pattern? ive seen pics of farmall model A's and B's that appear to have the same size wheels and tires i need. i need to find replacement rims and tires

rear wheel bolt pattern

rhettcale

Member

Janicholson

Well-known Member

rhettcale

Member

Similar threads