types of pulley wheels for H

Farmallb · Dec 27, 2008

was there Ever any pulley wheels made with grooves cut into the face for either a V belt or smaller width flat belt. Also, were there any steel faced wheels for H/M/

Janicholson · Dec 27, 2008

To mu knowledge the answer is no. There were drive setups using the pulley drive gearing for many different attachments from cotton pickers to corn pickers etc. These used roller chain drives for the most part. The flat pulleys were conventional for the time at about 7 inches widw (approximate) both cast steel, and more common Paper laminated pulleys were available. The wide pulleys work well with narrow belts, including a under stressed V belt in many low power applications. Making a pulley center to drive a device is pretty easy with a flat pulley and a lathe. A local Technical school would be a place to go this time of year to start a new project. Find their web site and contact the machine shop teacher by Email. JimN

glennster · Dec 27, 2008

here is a double pulley mounted on my m, it drives a 260 amp dc welder. welder was made by haddican bros, they supplied the pulley also. i have a steel belt pulley in the barn somewhere, came off one of my m's.
<a href="http://s121.photobucket.com/albums/o234/glennster_01/?action=view&current=DCP02018.jpg" target="_blank">

DCP02018.jpg" border="0" alt="Photobucket

</a>

there are prolly quite a number of aftermarket doo-dads that were available for these old tractors. be interesting to put a list together with photos!!!! things like the heisler and m+w 9 speeds, m+w's version of the live pto, ect
Untitled URL Link

Wardner · Dec 27, 2008

KBfenders013.jpg" border="0" alt="Photobucket

</a>

How about direct mount? Sometimes you don't need a pulley.

types of pulley wheels for H

Farmallb

Well-known Member

Janicholson

Well-known Member

glennster

Well-known Member

Wardner

Well-known Member

Similar threads