560 gas hydro hose

Anonymous-0 · Dec 26, 2008

Have 560 gas need big hydro hose coming out of pump going to steering countsel.It has three 5/16 bolts at pump in a triangel patern.Bates said can not get new.Any one have used.

El Toro · Dec 26, 2008

If the hose is still good at the 3-bolt flange your local hydraulic shop may be able to cut the hose out from the flange and install a new section
of hydraulic hose with crimp on fittings and install the correct fitting on the other end. Whether it's pipe thread or a tube swivel nut.
They would need to see the hose.

If this isn't possible call steelwheelranch at 785-548-7437 to see if they have a good used hose. Hal

bc · Dec 26, 2008

On my 2606 with the same setup, someone took and welded some type of a hose connection on the second pump flange with a similar bolt up flange.

You might think about getting a female swivel JIC fitting that can be welded in. Then it is easier to change the hose. It takes a 3/4" or #12 hose and fittings. The secondary pump uses a 5/8" or #10 hose and fittings.

Let us know what you find out and do.

Anonymous-0 · Dec 26, 2008

I ittook to the hose dr. its a #14 swivel O ring He said they don't make A #14?? maybe I need to find diferent hose guy.

Bermuda Ken · Dec 26, 2008

You CAN still get the hose from IH. Order hose part # 370964R91...

The c-IH parts warehouse at Indy shows having them on hand. Most dealers in the midwest that are serviced by that parts depot would get one the next day if they ordered it.....

J.J. from Afton · Dec 26, 2008

They are still availible from CaseIH, I just got one last spring for my 560 Be ready for an expensive price though, its around $130.

-Jordan

Anonymous-0 · Dec 26, 2008

thanx I will call tomorrow

Steve in IL

560 gas hydro hose

Anonymous-0

Well-known Member

El Toro

Well-known Member

bc

Well-known Member

Anonymous-0

Well-known Member

Bermuda Ken

Member

J.J. from Afton

Member

Anonymous-0

Well-known Member

Similar threads