560 Hydro oil filling

Anonymous-0 · Dec 18, 2008

Yes guys this is a stupid question, but where is the correct place to add and check hydrolic fluid on a 560 gas. The previous owner has a pipe coming out of the front hydro valve with a cap on it.This takes forever to add!! I looked all over and cant locate the fill hole. My 400 450 and 300 has a dip stick on the side but the 560 dosnt. any help will be great! Thanks

Rick Dorale · Dec 18, 2008

It has a common sump with the transmission. The filter is on the right side of the torque housing behind the hexagon cover with six bolts, opposite the hydraulic pumps on the left side. there is a check plug on the side of the rear end housing in front of the clutch pedal. You fill the unit with oil by taking off the plate on the top off the transmission on the right side opposite the gear shift, or the gear shift itself would work. While you have it off cut a hole in the plate, then weld a short inch and a half pipe 2 or 3 inches long to it and put a threaded cap on it for the next time

Anonymous-0 · Dec 19, 2008

I wondered about that plate. Thanks for the info!!! Doug

Clefus · Dec 19, 2008

Mine has a pipe with cap welded to the cover ahead of the hyd valves /below the batteries.....it is on an angle towards the filter side....

560 Hydro oil filling

Anonymous-0

Well-known Member

Rick Dorale

New User

Anonymous-0

Well-known Member

Clefus

Member

Similar threads