Hydraulic valve for an M Farmall

biggerred · Dec 6, 2008

Can I use any open center, two way valve mounted between a bellypump outlet, and fill tube? In other words like the farmall valves that are mounted the same way that one must keep the hydraulic lever pulled back for? (that was a mouth full)

teddy52food · Dec 6, 2008

Janicholson · Dec 6, 2008

Better luck has been had using a T in the drain hole. Look up Janicholson MH hydraulic in the Search for at the parts and pieces gallery to the left. JimN

Mesquite Bob · Dec 7, 2008

Nice simple set-up for the Saginaw 3pt.

Hook-up provided by Minneapolis-Moline front;

Fab mount;

Bob

biggerred · Dec 7, 2008

Great pics!! That is it exactly!! Thanks!!!!!!!!!!!!

tcanthonyii · Dec 7, 2008

Stupid question i'm sure but does the normal belly pump lever need to be in the "up-run" position for that to work?

Mesquite Bob · Dec 8, 2008

Yes, the lever is pulled back to give power up and power down with this set-up.

Bob

tcanthonyii · Dec 8, 2008

How hard is it on that belly pump to be running all the time when you working with the hydraulics or does it not make a difference.

T.C.

Mesquite Bob · Dec 11, 2008

I've worked this 1947 M very hard while blading dirt, mud and hardpan, now the control lever is pulled back and the blade stays several inches off the ground for weeks at a time.

There's no problem with the weight of a bush hog either.

Changed out the old oil, 30wt non-detergent is still very clean after a lot of work on private roads and fields.

Bob

Mesquite Bob · Sep 26, 2017

This is a very old thread, just wanted to update and say that the hydraulics for the 3pt are still working great.

Hydraulic valve for an M Farmall

biggerred

Member

teddy52food

Well-known Member

Janicholson

Well-known Member

Mesquite Bob

Member

biggerred

Member

tcanthonyii

Member

Mesquite Bob

Member

tcanthonyii

Member

Mesquite Bob

Member

Mesquite Bob

Member

Similar threads