(800) 853-2651
SHOP NOW

MV over haul kit

M

M inMo

New User
Probably a silly question, but, I have an MV and is needing an overhaul. My neighbor is going to do it,he is very capable. He said "have you bought a overhaul kit yet? How do I go about that. What kit do I ask for, and where do I get it? Thanks for you help
 
He needs to tear the engine down before you buy a kit. The crankshaft will need to be measured to determine which size of main and rod bearings are needed. Also need to know the part number on the cylinder head so the correct valve kit can be ordered.
 
I would have your auto machine shop to furnish the bearings too. Now would be a good time to have the block cleaned and all the oil passages cleaned and blown out. Have them install new cam bearings. Prior to SN 278107 the mains measured 2.7475-2.7485" and the rods 2.4975-2.4985. Hal
 
Once your guy has the engine apart and all the measurements are made, have that block cleaned, assuming hes doing an off frame rebuild. Take the block and head to a competent automotive machine shop. The ywill have all the specs for you engine, and will know what all you need to do to it. Doesnt sound like you have too capable of a neighbor, as he should have known all of this, and where to get a kit!
 
You can get engine kits less the bearings here off this Forum under "Marketplace." That's to your upper left. Hal
 
I have overhaul kits available for your MV. I sell the bearings separately if you need them. You will need the serial number of your tractor to get the correct overhaul kit. If you like, you can e-mail me and I will quote you a price.
 
You must log in or register to reply here.

Similar threads

B
Explain the TA on a Farmall to me
Replies
11
Views
920
Mike(NEOhio)
M
T
2TR15 - Piston / Connecting Rod position
Replies
12
Views
575
bmaverick
bmaverick
D
Part it;keep or sell it?
Replies
14
Views
2K
Leroy
L
F
Rear loader pump on 1365 Oliver for 1510 loader
Replies
2
Views
357
rrlund
R
C
Super Dexta 11" Single Stage Clutch Kit
Replies
5
Views
335
Majorman
Majorman
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top