Anonymous-0

Well-known Member
I ordered a decal set from YT for the A. It appears that each letter in Farmall is cut seperatly. Is there a top layer to keep them in place until they are placed, and then peels off? Any help would be appreciated.
Thanks Tim
 
If you ordered vinyl cut decals, each letter is cut individually. Once they are applied, there is nothing between them, unlike the mylar and the old-style water-soaked style, which had clear material between the letters.

Please tell us that all the individual letters in Farmall in the set you bought are affixed to one facing and properly spaced so that all you have to do is line them up, remove the backing and apply. Please.
 
Yes, in my opinion, the cut-out decals are preferable because they won't show paint fading the way the old sheet style ones did.

Just my opinion.

Oh, and like the other poster stated, you should be able to peel the backing off of them, stick them, and then peel off the semi-clear sheet once the decals are stuck properly.

That's what spaces them correctly.
 
Not vinyl cut. Clear material in between all letters. Not the best but O.K. for this job. She's all decked out now. Thanks,
Tim
 
Tim: You have good advice already. The benefit of the cut decals, not as much chance of air bubbles under the decal.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top