carburator rebuild

Anonymous-0 · Dec 4, 2008

where can I get some detailed instructions to rebuild my zenith carb.no matter what I do the gas keeps running out the bottom.

MIKE FRENCH · Dec 4, 2008

Your float needs reset or a new one. I have fought them for hours before, they can be really touchy sometimes, good luck.

old · Dec 4, 2008

A good kit will have the instruction with the kit a cheap kit will not. My self I use Walker brand carb kits and they have very good instructions. Either way it sounds like you didn't set the float right or the float is bad either one will cause your problem. BTDT many times
Hobby farm

Anonymous-0 · Dec 4, 2008

Did you try seating the needle valve with a hammer? China does have tolerances of more than a couple inches on fine tuned stuff, the rest is slit shot.

Rust may not be your friend either, kinda like I told my daughter when she started dating. It only takes a little.

Tapping the needle valve into the seat will seat it sometimes.

carburator rebuild

Anonymous-0

Well-known Member

MIKE FRENCH

Member

old

Well-known Member

Anonymous-0

Well-known Member

Similar threads