ScottyHOMeY
Well-known Member
I was just browsing back a few days and saw your question about setting up your clutch. I found a table in the I&T manual for Rockford clutches. If that is what you've got, they give two sets of specs.
For what they call "early" Ms and 6s (9-spring covers) they list 1-3/32" for the cover and 2-21/32" for the fingers. For "late" Ms and 6s (12-spring covers) the fingers are the same but the cover is 1-1/32".
That same table shows the 27/32" and 2-25/32" you mentioned for your H, so if you've got the same type clutch, maybe these numbers are what you're looking for.
HTH
For what they call "early" Ms and 6s (9-spring covers) they list 1-3/32" for the cover and 2-21/32" for the fingers. For "late" Ms and 6s (12-spring covers) the fingers are the same but the cover is 1-1/32".
That same table shows the 27/32" and 2-25/32" you mentioned for your H, so if you've got the same type clutch, maybe these numbers are what you're looking for.
HTH
