Super C cut ou/regutalor

FF in MI · Nov 16, 2008

Hello
I have a 12v converted super C, i need to find out if it has a voltage regulator or a cut out
thanks

JanicholsonCant beat that · Nov 16, 2008

I believe all Super Cs had regulators. If it has a three position light switch, it will have a regulator. ODB Off Dim Bright. If it has a 4 position light switch (it should not) it will be LHDB Low charge high charge Dim Bright.
That is used on all Farmalls with a cutout. (except those that originally had no light system from the factory as an optional delete) they had a three terminal cutout with a low charge resistor for the generator for starting purposes.
Because you state it is converted, it might have an alternator in which case it probably has a built in regulator in the case of the alternator.
If it is a generator system, it could have a cutout, but unlikely. If it has a little box connected to the generator, and that little box has two terminals only and it has the 4 position light switch, it is cutout. JimN

Janicholson · Nov 16, 2008

Well my computer seems stuck on putting-- Can't beat that on my name-- when I tried to use it in the reply mistakenly on my part. Can you beat that! JimN

John T Cant beat that · Nov 16, 2008

Anonymous-0 · Nov 17, 2008

SC should have a regulator on a bracket located on the bottom of the mounting bracket for the generator.

Super C cut ou/regutalor

FF in MI

Member

JanicholsonCant beat that

New User

Janicholson

Well-known Member

John T Cant beat that

New User

Anonymous-0

Well-known Member

Similar threads