300u hydraulic noise

Anonymous-0

Well-known Member
This message is a reply to an archived post by JimB2 on August 24, 2008 at 06:42:01.
The original subject was "Re: 300u hydraulic noise".

How do you get to that screen?
 
Darren, unfortunately it is under the seat. You have to remove the seat, take about a dozen studs out of the top of the hydraulic housing casting. You will see the seem where the casting separates, then lift the 100 lbs monster straight up to prevent crushing the screen. Sometimes if the screen is badly clogged the screen will be sucked flat. It should be tubular.
Search the archives for 300U Hydraulic and you will find many posts with good procedures for removal of the hydraulic casting.

Good luck
JimB
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top