exhust lift of Farmall A

wayne gampp

New User
Just started a restoration on my Grandfather's A which has an exhust lift system. It all seems to be there but I need advice about how to service this system and what parts should be replaced. The control valve was stuck and I now have it free. I have not yet been unto the tank up front. Someone has changed some of the lines over the years and I would appreciate a picture of a good orgional system
 
What implement is on the tractor for the lift to operate as theres no way to check the system without a load.Leave your e-mail open and i can send photos just tell me which area of the system .
 
The tractor is equipped with field cultivators which are not on the tractor at present. I am interested in pictures of the lines from the tank to the control valve. Also any info that would be helpfull in rebuilding the system.
 
The hose from the valve assy by the filter goes to the cycl from the out ward port on top of the valve. Heater hose works fine. The inword port goes to the pressure valve on top of the manifold. This should be pipe. The hose goes to the bottom of the cycl. The pipe plug in the front of the cycl is to bleed the system in the winter as there will be moisture and an oily mix in the bottom of the cycl. That mixture comes from condensation from the exhaust. I also keeps the leather soft and helps it to seal. If the sysl is not used in the winter draining is not necessary. A few squirts of oil added in the breather plug where the brace supports the top of the cycl also keeps the leather in good shape.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top