DALE ALLEN
New User
Can the distributer driven pump on a Super MD be used to drive a Char Lynn power steering motor??
- Thread starter DALE ALLEN
- Start date
Janicholson
Well-known Member
Yes. If it will be necessary to use a priority valve so the hydraulic system continues to function. Several styles are available. If you choose one that can handle 12GPM it will work (even if your pump is somewhat less than 12) Adjust the pressure so that the steering works very well, but no higher.
The above assumes you have a good pump. JimN
The above assumes you have a good pump. JimN
Allan in NE
Well-known Member
Absolutely and what Jim says.
Gotta get that pressure down and insure that the stering has first oil at the feeding trough tho.
Come right off of the pump with full pressure into the PV, then the priority valve's "exhaust port" will then run the rest of the system.
Allan
Gotta get that pressure down and insure that the stering has first oil at the feeding trough tho.
Come right off of the pump with full pressure into the PV, then the priority valve's "exhaust port" will then run the rest of the system.
Allan
Steven f/AZ
Well-known Member
northerntool DOT com has them for around $85
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy