(800) 853-2651
SHOP NOW

3pt hitch jumps up and down on International B-414

R

RogerMS

New User
The 3 pt hitch on my International B-414 jumps up and down when under a load. The jumping is less for a light load but it is still noticable. What causes this and how can I fix it?
 
Roger, push the depth control lever forward (outside lever). The depth control should only be used for in ground implements like plow and cultivator. The sensing rod is that shiny rod by the 3pt hitch top link bolt.

JimB
 
I will try the depth control lever. I don't have the tractor here so I will have to try that a couple of weeks from now. Seems like I had pushed the depth control all the way forward and then nothing worked, but I don't really remember for sure.

What does the sensing rod do? How does it work? Do I adjust the sensing rod if pushing the depth control all the way forward doesn't work? If so, how do I go about adjusting it?

Thanks for the help.
 
Jim,
Some of those units were very peculiar about the proper oil in the Hy/Trans. Be sure the oil you have there is the oil that was specified for the tractor. I had the same problem with a MassyF. and had to completely drain the Trans and use 90 W Mineral Oil. It fixed the problem. Check with Case/Internatioal and see what oil was required for the B-414.
 
You must log in or register to reply here.

Similar threads

C
3pt hitch goes up and down but will not maintain a position when stopped it goes back up
2
Replies
34
Views
1K
camfire
C
4
404/ 414 engine swap with Farmall H
Replies
1
Views
361
BarnyardEngineering
BarnyardEngineering
3
2pt-3pt conversion ? on 300 U
Replies
16
Views
427
BarnyardEngineering
BarnyardEngineering
crsutton81
5140 hitch controls
Replies
3
Views
132
crsutton81
crsutton81
1
White 1370 3pt hitch not working
Replies
10
Views
457
1370
1
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top