(800) 853-2651
SHOP NOW

H front wheel bearing grease retainer

A

AH64Dattack

New User
I’ve got my H’s front bolster looking brand new with new seals and paint. However I found my left front wheel hubs does not have any bearing grease retainers in it. The right one has both inner and outer grease retainers. I ordered them through Case/IH. These grease retainers go inside of the bearing cups. Can I just tap the inner and outer bearing cups out from the opposite side of the hub so I can get the grease retainers in behind them? Or is their something else holding the bearing cups in? Thanks
 
I always damage these grease retainers when I remove the bearing races. I have never put new ones back as most trailer wheel bearings now days do not use them. They will fall out when you take out the bearing races. Roger
 
Be sure and clean out all the old grease and you will see some notches on the casting behind the bearing race to enable you to tap out the races.

Randy
 
You must log in or register to reply here.

Similar threads

B
Farmall m front wheel bearing grease retainers
Replies
11
Views
549
chhanes
C
T
Front wartime spoke cutoff wheel trouble
Replies
6
Views
384
Mark-Ia
M
W
Work on the narrow front WD steering continues...
Replies
0
Views
250
Will Herring
W
showcrop
901 front wheel bearing retainer
Replies
5
Views
183
John P.
John P.
super99
Trailer Wheel Bearing Grease
Replies
16
Views
1K
504
5
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top