1066 being a leaker

I.H.parkingonly · Oct 15, 2008

My 1066 is leaking hy-tran from where the T/A plunger goes into the mcv pump block, it looks to me like there is probably just an o ring. Anyone been here before?

the tractor vet · Oct 15, 2008

Yep i have on many occasions .

bigdaddyfarms · Oct 15, 2008

my 706 is leaking at the same place. i fear the worst. i hope the "o"ring.

I.H.parkingonly · Oct 16, 2008

Is it just an o ring tractor vet?

the tractor vet · Oct 16, 2008

Yep, just and O/Ring . Now ya may have a problem geting the valve out as since the design of the wrench flats can be a pain to get to turn with a wrench sometimes . There has been times that ya can not get a wrench on it . Also if the nut has sever ware on it it may not hold for long and this also apply's to the valve if it has deep scoring it will in time cut the new o/ring. Just unscrew the nut and bring the whole valve up and out. Make sure that ya clean off all around the nut before y start to remove it .

I.H.parkingonly · Oct 17, 2008

Thank you

1066 being a leaker

I.H.parkingonly

Member

the tractor vet

Well-known Member

bigdaddyfarms

New User

I.H.parkingonly

Member

the tractor vet

Well-known Member

I.H.parkingonly

Member

Similar threads