Need new seals for IH #30 loader cylinders

Andy Motteberg

Well-known Member
Hi all,
I need new seals for the cylinders on my IH #30 loader for my 1943 Farmall H. I checked NAPA and a few other places in town today and nobody had them. They told me to check a CaseIH dealer, but I don't have a CaseIH dealer around here. Does anyone know where I could get them?? I need my loader working soon.

Thanks,
Andy
 
Take the measurements and part# and tell NAPA to get them they are giving you a bunch if crap a seal is a seal. Try CAR QUEST i get them over nite. Lots of places can get a seal. Just need the measurements.
 
I redid my #31 cylinders this spring. The parts were about $50 per cylinder (packings, cups & gaskets for both ends) from CIH. They are small and light enough that you should be able to get them mailed to you from a decent dealer"s parts department. Since they probably have to special order them anyway, they might just dropship them directly to you.
The biggest hassle is taking out the snap ring that holds the packings in place. On mine they were so gunked up that I could tap them in 1/4" and get the rings off, going back in was a little trickier because the springs could actually move like they should, but the whole job only took a couple of hours.
It was a pleasure to have the loader not squirt oil out and bleed down, now I wonder why it took me so long to get the job done.
If you need any help with the project, feel free to drop me a line.
Ed
 
Thanks, Napa said they did not have them and could not get them, they said they don't have any hydraulic parts. It seems like the NAPA here has really gotten away from tractor parts. All they have is car parts. I've stopped there for many tractor parts and all I've been able to get is the fan/generator belts and air cleaner hoses.

Andy
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top