H Belly Pump

chris blohm · Oct 7, 2008

i have a 41 H and want to use it to mow my hay i have a 9 foot mower conditioner with sa cylinder
and my H won't do it. My question is will an H belly pump pick up a 489 haybine or is the pump going bad? and also i have 2 ports on the left side of the tractor and one on the other side which is where i have the line for the outlet tied in to will it change anything if i use a line on the left side of the tractor instead of the right?
thanks chris

BillyinStoughton · Oct 7, 2008

An H should pick up a 489 without much issue (regardless if it's an early or late pump). I've moved our 489 on numerous occassions with an H.

Ports on the left or right side should both be pressure ports and should lift your haybine. The return on a belly pump would be tied into the tapping at the very bottom of the pump below the torque tube.

Billy

chris blohm · Oct 7, 2008

Thanks when i hook it up it will rasie the machine just enough to see it move but i can not get (mower conditioner) off the saftey stop to lower it to the ground

old · Oct 7, 2008

If you have another tractor hook it up to the MOCO and see if it goes up with it. If it does then the H has a problem if it doesn't then its the cylinder on the MOCO
Hobby farm

chris blohm · Oct 7, 2008

Thanks guys I now that when i hook my ford to it it plays with the moco so now i know where to go
again Thank you all

Anonymous-0 · Oct 7, 2008

whats a belly pump look like

H Belly Pump

chris blohm

Member

BillyinStoughton

Member

chris blohm

Member

old

Well-known Member

chris blohm

Member

Anonymous-0

Well-known Member

Similar threads