help id Farmall rear work/tail light assembly

Al L. in Wisc. · Oct 5, 2008

I need help to identify a rear work-tail light on my six volt Farmall 340. The shell is 4-1/2" in diameter and 3" deep. The 5/8" wide by 1/4" high opening for wires makes the harness I ordered, thinking it was a 'Guide' brand, incompatible with what I received. I must have thrown the note on my puter screen w/instructions for posting two pictures, hope the images help. Nests were empty and I was glad of that. Any input would be appreciated.
Farmall rear work tail light

charles todd · Oct 5, 2008

Your link did not work. Do you have your album set to "private"?

Charles

Dellbertt · Oct 5, 2008

Charles, the link worked for me. you have to click on 340.

Im not sure what you are asking but the light in the pic looks just like the rear red/white light on my 300U.

charles todd · Oct 5, 2008

Got it that time. Yes, it seems to be a combo red/white with a switch. My 504 has two leads that were wired to two different positions on the dash switch. Mine is on the bench, waiting to be reinstalled.

Charles

Anonymous-0 · Oct 6, 2008

here is pic

Al L. in Wisc. · Oct 7, 2008

I am wondering if it is a 'Guide' brand or the 'Dietz' brand light. That is a penny I put on the back of the shell for comparing size of opening - 5/8" wide by 1/4" high for the wires/grommet.

help id Farmall rear work/tail light assembly

Al L. in Wisc.

Well-known Member

charles todd

Well-known Member

Dellbertt

Member

charles todd

Well-known Member

Anonymous-0

Well-known Member

Al L. in Wisc.

Well-known Member

Similar threads