cub wiring diagram

L. McIlravy · Oct 4, 2008

I bought a new 3 position light switch for a 1949 farmall cub. After testing all the terminals for power (which they all tested fine) now the starter acts as if it has no power. I think the kill switch may be shot. Any wiring diagrams anyone? Any other advice?
Thank you,
Lincoln

Janicholson · Oct 4, 2008

This should do for wiring.
If it has a mag it is a kill switch that grounds the mag. If it has a generator and regulator, the three position is correct. If it has a cutout relay and no regulator it needs a four position switch.
The Ignition switch with a distributor ignition would usually fail to no start from no spark, not no battery power to starter. It could be not charging the battery. Which way does theAmp meter move when running? JimN
Bob Ms diagrams

Gale Roberts · Oct 5, 2008

Perhaps the starter switch which is mounted on top of the starter is bad.

cub wiring diagram

L. McIlravy

New User

Janicholson

Well-known Member

Gale Roberts

Member

Similar threads