Farmall Draw-Bar Assembly ...does one size fit all?

Ida Red · Oct 4, 2008

Does the sliding draw-bar assembly from a Farmall A fit the Super A,100,130,140. Red

glennster · Oct 4, 2008

i looked at the drawbars in oems catalog. they show a different drawbar for the a as opposed to the super a , 100, 130.

Jim Becker · Oct 4, 2008

I suppose someone will say they made it fit. But the A was one design, the Super A and up was another.

Hugh MacKay · Oct 5, 2008

Les: I get the nagging feeling you are talking swinging drawbar tongue. If that is the case, they are the same. That is not parts book experience, but rather what I've seen in my travels.

The U drawbar is different as it attaches to final drive differently. A has a plate welded to ends of U drawbar. SA and others have a 1/2" plate bolted to final drive, U drawbar attaches to those plates below casting of final drive, and the plate gives an adjustable height drawbar.

Jim Becker · Oct 5, 2008

The swinging drawbar tongue is probably close enough to use. But it is a different part from the A to Super A. The cross bar is definitely different.

Farmall Draw-Bar Assembly ...does one size fit all?

Ida Red

Member

glennster

Well-known Member

Jim Becker

Well-known Member

Hugh MacKay

Well-known Member

Jim Becker

Well-known Member

Similar threads