point3dave
Member
The air bonnet on top has a 3/8 hole on top and the rest sits on the pipe I am assumeing there is some type of clamp on the pipe that fits on the pipe Thanks Dave k
- Thread starter point3dave
- Start date
Janicholson
Well-known Member
Assuming you are talking about the precleaner or dommed screen that fits on the top of the intake tube above the hood, behind the muffler.
Therenarentwo types. one is a simple dome with no holes in it (as supplied) and a mesh screen in a dome shape. below that surrounding the mounting tube. This style has no attaching bolts or clamps, it just slides on with a friction fit. They do not come off unless pulled on firmly.
The other is an optional type with a glass jar attached to collect insects and larger trash by modest cyclonic seperation with directed intake louvers, and the jar to collect debris. It is attached with a clamp and pinch bolt. JimN
Therenarentwo types. one is a simple dome with no holes in it (as supplied) and a mesh screen in a dome shape. below that surrounding the mounting tube. This style has no attaching bolts or clamps, it just slides on with a friction fit. They do not come off unless pulled on firmly.
The other is an optional type with a glass jar attached to collect insects and larger trash by modest cyclonic seperation with directed intake louvers, and the jar to collect debris. It is attached with a clamp and pinch bolt. JimN
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy