JABBERJAWS
New User
I JUST HAD THE ENGINE REBUILT. THEY DELIVERD THE TRACTOR WITHOUT THE PLATE UNDER THE FLYWHEEL. I NEED TO FIND ONE...ANY SUGGESTIONS.....ITS A TWO BOLT COVER...KINDA RECESSED
- Thread starter JABBERJAWS
- Start date
That cover is part number 50262DA. I suspect the same as on the W-4, but I only have the I-4 parts book. The one on my I-6 is only a piece of fairly thin metal and has a drain hole. And by the way, the W-6 part number is the same. Some of the salvage yards should have one or I don't think it would be a big deal to make one that would do the job.
JABBERJAWS
New User
HASS...thank you for your input...so you have a I-4
also?
also?
John M
Well-known Member
- Location
- Nunyafn business
They are in fact the same. Thats what mine came off of!
John M
Well-known Member
- Location
- Nunyafn business
Yep! Well, I bought it, and gave it to my brother for his birthday one year. He loved the little thing, so I gave it to him.
There are two drains, one at the rear bottom below the PTO. The other is a the center front where the joint to the big U frame attaches to the transmission housing. The rear is the main drain. There is a level plug on the side. I think it's on the left side somewhere in the area of the brake pedal shaft. I'm not sure what the capacity is, but I think it would be the same as the Farmall H. I know the I-6 holds 14 gallons. I think the I-4 is probably about half of that. The data book I have does not show the transmission capacity.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy