Rear Light Fitting for a W4/W6/W9 International

Ron Haling · Sep 28, 2008

Can anyone tell me where the rear light shold be fitted on a W4 tractor
Does it go the same place as a W6/W9 and where does the rear light fit on these tractors

Athol Carr · Sep 28, 2008

The light goes at the bottom of the left rear fender. There is s curved cast iron bracket bolted to the bottom of the fender where the angle across the back of the platform curve3s around the base of the inside of the fender.

John M · Sep 28, 2008

The one athol describes, I have never seen, but then there arent too many W anything around here. What I have seen, on my I-4 is a small bracket held on with 2 bolts to the flat of the "footrests". The I-4 shhetmetal is very different from the Ws though.

Eric Bergstrom · Sep 28, 2008

I have a W4 as well. The light is supposed to go where athol said... on the base of the left hand fender.

After talking to some farmers who grew up with W4's, I decided to put mine on the opposite side to avoid kicking it off (since most people get on the tractor from the left).

I'll post a picture of mine, just know that it's in the right place, but on the wrong side technically. You can see the two new bolts on the left side where it would've mounted from the factory.

Rear Light Fitting for a W4/W6/W9 International

Ron Haling

Member

Athol Carr

Member

John M

Well-known Member

Eric Bergstrom

Member

Similar threads