(800) 853-2651
SHOP NOW

Remote outlet flow adjustment

J

Jeff Benjamin

New User
I have an IH 966 and when I use the remote it seems to take quite a while to raise especially if the tractor is idleing. I was wondering if anyone knows if you are able to adjust the amount of flow through the remote. Thanks Jeff
 
I am not 100% sure about a 966, but I do not think the remotes are "adjustable"... You could have a leaking valve spool, check valve in the valve, bypassing relief valve, worn pump, partially blocked filter, failed oring on the suction tube... These are some things I would check out first.

Charlse
 
Pull the rear pump and check that o-ring and gasket. They have a real nasty habit of leaking internally.

If you are satisfied that they are/were good, replace the pump.

Allan

pump1.JPG
 
While we are on this subject. I have a 1066 that does that when the 3pt. lever is in the far foward position.

If I move the lever back a ways every thing works just fine.

What position is your 3pt. lever in?

I believe the 3pt. lever gives you the ability to set the speed of the hydraulics.

Am I correct?

Gary
 
Hey Gary!

You're talking about the draft lever, right? Yep, it does control the speed of the remotes to a certain extent.

Got this toy of yours mounted the other day. Heavy built bugger, 'taint it? :>)

Allan

ACF2C6B.JPG
 
No Allan it does it with the lift lever. When it is all the way down the loader will move slow. If I lift the 3pt just a little it will work fine.

I carry a bale on the 3pt. at the same time as the loader. If I set the bale down and don't pull the 3pt back up a little I have slow lift on the loader.

Yep that blower is heavy and you need the weight sometimes when you spin out. Lift a little and you're on your way.

Gary
 
You must log in or register to reply here.

Similar threads

P
275 lift arm and remote valve controls?
Replies
1
Views
154
bentrims
B
8
560 run a backhoe?
Replies
11
Views
533
caterpillar guy
C
J
Help me understand remote hydraulics
Replies
19
Views
558
TheOldHokie
TheOldHokie
O
J.D 3rd. rear scv thread size
Replies
10
Views
215
wore out
wore out
B
Help me understand power beyond/auxiliary hydraulics
Replies
9
Views
632
BigJeeps
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top