Where to check hydrolic fluid on 240U

veener79 · Sep 26, 2008

OK i know this might sound dumb. But I do not know where to check the fluid level on my 240U. I finaly have her back up and running. After buying her I had to redo the whole electrical system. Half was setup for 12V + ground and the other half was setup for 12V- ground. Because of that jsut about everything was toast. Now before I use the rear hydrolics I need to know how to check the fluid level. I realy do not know.

The shop manual does not show where to do it.

Anonymous-0 · Sep 26, 2008

should be a plug under step under clutch pedal.uses hytran. oil.

glennster · Sep 26, 2008

veener, shoot me an email, i have the lubrication guide and preventative maintenace manual at the shop. let me know what all you need, i can scan the pages and email em to you. i have a 240u also.

veener79 · Sep 26, 2008

Just tried to PM but told it was under construction. My e-mail is veener88 at hotmail dot COM.

I can use what ever would help me with taking care of this tractor. This is my first tractor. so I am learning as I am going.

Thanks for your help.

glennster · Sep 27, 2008

i will email them to you monday when i get to the shop.

GA Dave · Sep 27, 2008

The fill plug is below the gas tank. 1 inch plus plug to the right of the serial number tag. The drain is one of the three plugs at the bottom. I think it"s the one below the fill plug. David............

veener79 · Sep 27, 2008

(quoted from post at 01:09:44 09/28/08) i will email them to you monday when i get to the shop.

Thanks so much.

Where to check hydrolic fluid on 240U

veener79

Member

Anonymous-0

Well-known Member

glennster

Well-known Member

veener79

Member

glennster

Well-known Member

GA Dave

Well-known Member

veener79

Member

Similar threads