F4 mag for dummies

Anonymous-0 · Sep 13, 2008

F20 has fairly weak spark so Im going to install points and condenser. Points I found but where is the condenser hideing ?? Thanks Jeff.

Peavy Tx · Sep 13, 2008

Its inside the body of the mag.Peavy

Bob · Sep 13, 2008

You can look at or print out the complete Blu Ribbon IH mag manual by going to THIS site:

http://www.cleancomputes.com/Cub/Blue%20Ribbon%20Service%20Manuals/GSS-5035%20Service%20Manual%20Magnetos/index.html

Nebraska Kirk · Sep 13, 2008

To get to the condensor you first have to remove the magnet, then remove the top cover, the condenser is under there.
Nebraska Kirk

Old-F20 · Sep 13, 2008

ive found on a few of mine, a weak spark was the result of a weak magnet. Nebraska Kirk can recharge em for ya

one thing that makes a huge difference on those mags is somply filing the points, and keeping them clean, along with the inside of the point cover!! :wink:

Anonymous-0 · Sep 14, 2008

Thanks to everyone,but I didnt know it would be so much trouble to get to the condenser. should I remove the whole mag from tractor or just replace points and try that first ? Thanks again ,Jeff.

F4 mag for dummies

Anonymous-0

Well-known Member

Peavy Tx

Member

Bob

Well-known Member

Nebraska Kirk

Well-known Member

Old-F20

Member

Anonymous-0

Well-known Member

Similar threads