Engine oil leak on and 806D....

Dan Swanson · Sep 8, 2008

I don't know what the tube behind the oil cooler is called. It is the 1 1/8" tube that comes out of the top of the oil pump about six inches, then has 90 degree bend forward and then ties back in right above the where the tachometer hooks in. Mine is leaking pretty good at the top forward end where it goes into the two bolt flange. Is it an easy fix with new O-rings or is there a special seal that needs replaced? My IT manual shows a picture of it but doesn't describe it. Or how the repair it.
Thanks, Dan

Bill Lisbon · Sep 8, 2008

It is a easy fix, replace o-rings, but get them from case IH, they are special. I coat them with ultra black silicone when I replace them this seems to fill in the worn area.

Engine oil leak on and 806D....

Dan Swanson

Member

Bill Lisbon

Member

Similar threads