154 lo- boy splitting tractor in half HELP

Anonymous-0 · Sep 5, 2008

hey all, i was wondering what am i missing in splitting my 154 lo-boy in half to take off the transmission clutch[ discs are shot] took out all the bolts or so i think ,is there any hidden snap rings bolts, etc that i should be aware of? that are not plainly visible? everything is diconnected from the engine half and there were about 8 bolts total on the back end of the rear differential, can someone please run me through the process i have a 1971 . thanks

BILL

El Toro · Sep 5, 2008

Did you remove all the cap screws from the pressure plate that secures the pressure plate to the flywheel? It doesn't mention any snap rings
in my manual. Hal
PS: Can you post a picture?

Janicholson · Sep 5, 2008

Caseih.com Search for parts.
Diagrams are on line and the bolts are shown! JimN

ejr-IA · Sep 5, 2008

You dont have to split it to replace the clutch

El Toro · Sep 7, 2008

Here's the parts breakdown on your Cub 154 clutch.
The disc p/n is 404640R93 and the pressure plate is 531708R11. Need to have your serial number when ordering. Hal

Steve Butram · Sep 7, 2008

The Engine will need to slide forward to get the shaft out of the clutch disk

154 lo- boy splitting tractor in half HELP

Anonymous-0

Well-known Member

El Toro

Well-known Member

Janicholson

Well-known Member

ejr-IA

Member

El Toro

Well-known Member

Steve Butram

Member

Similar threads