Will Belt pulley drive from 300 Farmall fit H ??

Anonymous-0 · Aug 22, 2008

Sold a 45 H that I had setting in a shed and the buyer wants a belt pulley drive on it. I have a complete rear half of 300 Farmall with a drive unit on it and looks similar from outside but wondering if the TA changed the drive at all. Is it a direct fit or do I have to stick with H or Super H? Thanks

rustyfarmall · Aug 22, 2008

I'm thinkin' that they are the same. The part number for the complete assembly for an H is 51489DB, but the 300 probably has a number ending with an R or R1, and I don't know how to compare those numbers.

Randy in NE · Aug 22, 2008

The part number for the complete assembly for the 300 is 360813R92.

rustyfarmall · Aug 22, 2008

I assumed as much, but how do you cross those numbers?

D Slater · Aug 22, 2008

Yes it will work, shift lever different from 45 H though.

Andy Motteberg · Aug 22, 2008

I could be wrong, but I think it would work, just a different shift lever.

Charlie M · Aug 22, 2008

My Dad couldn't get one from an H to fit a 350. I don't know if the 350 having a TA made a difference or not. I was only 11 at the time so it was a long time ago. It was a dealer that tried to make the swap.

D Slater · Aug 22, 2008

Some or most belt pulley gear box castings for H tractors don't have depressions to clear T/A housing cover bolts. In later years belt pulley attachments sold for H used the same belt pulley gear box housing as later tractors.

Anonymous-0 · Aug 23, 2008

Thanks for the replies. I think I will pull it off the 300 as it is easy to get off and then let the older gent try to put it on. migraine

Will Belt pulley drive from 300 Farmall fit H ??

Anonymous-0

Well-known Member

rustyfarmall

Well-known Member

Randy in NE

Member

rustyfarmall

Well-known Member

D Slater

Well-known Member

Andy Motteberg

Well-known Member

Charlie M

Well-known Member

D Slater

Well-known Member

Anonymous-0

Well-known Member

Similar threads