Jason Hurley
New User
I have a 1950 H that currently does not have live hydraulics. Obviously having live hydraulics would be a lot more convenient. Any one have any suggestions on where I could pick up a pump?
- Thread starter Jason Hurley
- Start date
rustyfarmall
Well-known Member
I can fix you right up if you want a new one.
Janicholson
Well-known Member
A 50 H will need either a M&W add on live pump, or a newer front cover. Late 52 or newer.
These will have the bolt spacing for the Live IH pump. In either case it is advisable to change the front cam drive gear set to stronger ones (again from late 52 to include 350 series. The original gears will only work if loads are very modest. A loader, or orher high effort attachment can (and will) break the gear/s, or hub of the gear/s. Look in the archives to settle on a solution. Rusty Farmall is very reliable, and may have all the varioous components. Recommended. JimN
These will have the bolt spacing for the Live IH pump. In either case it is advisable to change the front cam drive gear set to stronger ones (again from late 52 to include 350 series. The original gears will only work if loads are very modest. A loader, or orher high effort attachment can (and will) break the gear/s, or hub of the gear/s. Look in the archives to settle on a solution. Rusty Farmall is very reliable, and may have all the varioous components. Recommended. JimN
Jason Hurley
New User
I'm definitely interested. But whats it gonna cost me first and foremost?
rustyfarmall
Well-known Member
Just under $700. Brand new. Not rebuilt.
Allan in NE
Well-known Member
Splitpoint was in mid '51 on the H.
Allan
Allan
Steven f/AZ
Well-known Member
You can always go with my system, have about $750 in the whole works, including power steering and two-spool control valve...
You need to be a pretty good fabricator, though... and also have a good machine shop that's willing to listen to ya!
You need to be a pretty good fabricator, though... and also have a good machine shop that's willing to listen to ya!
rustyfarmall
Well-known Member
No. It is a direct replacement for the original super H, 300, and 350 live hydraulic pumps. Also available for the super M, 400 and 450.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy