6V lighting

mkirsch · Aug 14, 2008

All this talk about lights has me thinking again...

Where can I find a 6V flasher module and 6V amber warning lights?

I'd like to put some flashing hazard lights on the fenders of my Super A for "roading" it.

rustyfarmall · Aug 14, 2008

You should be able to find some hazard lights that will allow you to just swap the bulb to a 6 volt. Don"t know about the flasher unit. I"d be tempted to find out if maybe a 12 volt unit might still function with 6 volts.

Bob M · Aug 14, 2008

Most "heavy duty" 12 volt flashers will work fine on 6 volts.

All the flasher cares about is the current passing thru it, not the system voltage. So a (2) 6 volt stop/turn bulbs "looks" the same as (4) 12 volt stop/turn bulbs to the flasher. And it will flash 'em just fine.

SuperA-Tx · Aug 14, 2008

Case still lists the fender mounting bracket that was used on a 140 for the hazard lights. It would work on a SA too.

Left hand part # 394134R1
Right hand part # 547149R1

They may have the 6 volt hazard lights but I didnt check. I was working on a 12V 140 and had the other info available.

HemiMoparMan · Aug 14, 2008

Napa still carrys the 6 volt flashers for the old Volkswagons, I would imagine other parts stores do to.
The lights can be had on ebay on several sellers stores.

6V lighting

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

mkirsch

Well-known Member

rustyfarmall

Well-known Member

Bob M

Well-known Member

SuperA-Tx

Member

HemiMoparMan

Member

Similar threads