super m hydraulics are slow

scott linker

New User
my super m's hyraulics are really really slow the will barely lift the du al loader and the same goes for curling the bucket any suggestions on where to start? thanks
 
yes i have it throttled up it makes no difference.....i dont even know where to check the fluid level there is a tank up by the loader controls that i would guess u add there but it has no dipstick i have only had the tractor a week any help is appreciated
 

Ask away and don't be afraid... I haven't had any tractor until I got my 400 and I have had a lot of great advice and idea'd. Also get a operator's and shop manual. The shop manual really helps you figure out why something happens. Doesn't mean you have to do the stuff.
 
Here's a pressure gauge installation on the H & M
tractors. The Super M should be similar. Hal
a719.jpg
 
checked motor oil today to see if it was overfull it was good local tractor shop said loader tank should be at least half full if it has no dipstick it doesnt so i started adding it was 1 1/4 gallons low then i started it and checked the loader function still real slow better though but un capable of lifting much i am gonna try the gauge deal tommorrow at the live pump also it has a nightmare mess of hydraulic hoses tees elbows etc.. so anyone that could tell me what goes where so i could check that would be a big help it has behlen power steering also thanks again scott
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top