John in Ct
Member
Will a NH 451 mower work ok on a Farmall H with a Saganaw 3 pt hitch? I know how a NH 451 fits on a 3 pt. hitch with the top link. Will it be too light in front? Thanks.
- Thread starter John in Ct
- Start date
Steven f/AZ
Well-known Member
I highly doubt a sickle mower would be heavy enough on the 3-point to make an H light in the front...
Heck, Allan in NE lifted his diesel pickup with the 3-point on his M and it didn't lift the front of the tractor!
Heck, Allan in NE lifted his diesel pickup with the 3-point on his M and it didn't lift the front of the tractor!
Allan in NE
Well-known Member
The problem is gonna be if the hitch will go low enough.
Do you have the original hitch still on the tractor? If so, check your "lowered height".
That's the only thing I don't like about that Saginaw hitch. The original U-bar has to be chopped and narrowed for it to really work right.
Allan
Do you have the original hitch still on the tractor? If so, check your "lowered height".
That's the only thing I don't like about that Saginaw hitch. The original U-bar has to be chopped and narrowed for it to really work right.
Allan
Hugh MacKay
Well-known Member
John: As Allan put it, will hitch go low enough. Weight isn't going to be a problem, my next door neighbor mowed with a fully mounted 7' IH mower on a Super A for years. The NH might be a bit heavier, but not that great.
Anonymous-0
Well-known Member
Lot of difference in an M and an H. My 350 is a bit light on the front end with a mounted fast hitch 100 series mower on it. It is even a bit heavier than my M, but in different places. The M sits on the ground a lot better. 350 works fine in most places, but I have a few hills here, and you can notice it back there when mowing up those.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy