Farmall H, M, SH, SM, 350, 400 450 front wheel bearings

jhb · Jul 29, 2008

Are the front wheel bearings and races all the same? That is will they interchange for H through 450?

rustyfarmall · Jul 29, 2008

No! They will NOT interchange. H, super H, 300, and 350 are the same. M,super M, 400, and 450 are the same.

Andy Motteberg · Jul 29, 2008

No, they are not the same.

Bob · Jul 29, 2008

This may be of interest:

<img src = "http://i167.photobucket.com/albums/u125/27Grainfield/IHbearing1.jpg">

<img src = "http://i167.photobucket.com/albums/u125/27Grainfield/IHfrontWheeBearings.jpg">

tcanthonyii · Jul 29, 2008

I'll tell you from experience they aren't the same. The kit listed on this site as working on an M doesn't work and the kit listed for a 400 on this site didn't work for me. I am waiting on the races from the IH dealer so when I get those in i'll post all of the parts I needed as I was missing all of the wheel bearing parts except for the nut!!

T.C.

sammy the RED · Jul 29, 2008

It depends on which wheel that is on your tractor.

H with wheel 40 833 DA takes Bearing Pkg. 360 121 R91

H, M, 300, 350 with wheel 8 274 DBX takes Bearing Pkg. 361 294 R91

H, M, 300, 350, 400 with wheel 9 504 DXA takes Bearing Pkg. 361 295 R91

M, 400, 450 with wheel 8 284 DBX takes wheel Bearing Pkg. 361 295 R91

The above information is from: TPM-1 Rev. No. 3, January, 1962

Farmall H, M, SH, SM, 350, 400 450 front wheel bearings

jhb

Member

rustyfarmall

Well-known Member

Andy Motteberg

Well-known Member

Bob

Well-known Member

tcanthonyii

Member

sammy the RED

Well-known Member

Similar threads