Farmall B engine

Mark76 · Jul 25, 2008

Trying to overhaul a farmall b engine. The block has a casting number of 354898R2 and the head is 6716Db. Trying to figure out what I exactly have for an engine. I have tried two kits from TISCO a EOK1159-LCB and a EOK1150-LCB. Neither worked. Don"t know if this an original engine or not. The tractor serial number is 92295. I have a crank number of 356308r1 and a rod number of 30926. Long story short is that I do not have the original pistons. I do have original sleeves.

El Toro · Jul 25, 2008

I think you have the Super C C123cid engine. Your pistons should be 3.125" in diameter and the sleeves should be 7.060" in length. You can put an overbore kit without any machining with 3.250" pistons to raise the cid to 133ci. Hal

Dave BN · Jul 26, 2008

Does your tractor have a water pump? Most B's do not. That would indicate if you have a replacement engine. Dave

Mark76 · Jul 28, 2008

We thought the same thing and order a super C engine kit and the pistons hit the head.

Mark76 · Jul 28, 2008

the original sleeves measure 3.00 id and the overall length of the sleeve measures 6 and 7/8" .

Mark76 · Jul 28, 2008

I do have a water pump that was on the enigne.

Farmall B engine

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Mark76

New User

El Toro

Well-known Member

Dave BN

Member

Mark76

New User

Mark76

New User

Mark76

New User

Similar threads