Farmall H Liftall resevoir

Dean_Wheeler · Jul 14, 2008

I have a farmall H with a distributor driven hydraulic pump which utilizes the lift-all as a resevoir. If I need to plumb an additional return back into the resevoir, can I do so through the original "pressure port" elbows? Or do I have to T into the current return which goes in the bottom of the lift-all?

Nebraska Kirk · Jul 14, 2008

If the pump has been removed from the resevoir, then you can run the return to the original pressure ports, otherwise just T into your current return.

Dean_Wheeler · Jul 15, 2008

Thanks for the input, worked like a champ.

mkirsch · Jul 15, 2008

Where's the suction line connected? It should be in the drain plug for the belly pump so it can get to the oil. The return should be connected to the fill pipe.

Farmall H Liftall resevoir

Dean_Wheeler

New User

Nebraska Kirk

Well-known Member

Dean_Wheeler

New User

mkirsch

Well-known Member

Similar threads