1941 m hydrolics

Anonymous-0

Well-known Member
I have had my m for some time but never used the hydro lift system. I finally bought a 7ft blade and a boom pole for it. The system works without weight in the lift arms, but even the small weight of the boompole it wont lift. What could be the problem? I checked the pump oil and it seems to be ok.
 

It's very likely that the belly pump is very worn, and can't generate enough pressure. You will need to drop the unit and rebuild the pump.
 
(quoted from post at 22:46:37 07/06/08) I have had my m for some time but never used the hydro lift system. I finally bought a 7ft blade and a boom pole for it. The system works without weight in the lift arms, but even the small weight of the boompole it wont lift. What could be the problem? I checked the pump oil and it seems to be ok.

Frank, I have the same porblem with my IH-100. I replaced the unit under the gas tank, with one from a salvage yard. It was not much better than the one I originally had on there. I took it back and they rebuilt my old one, again with no success. It would lift me, 190 lbs, with no porblem but hook up the 5" disk and it would lift it almost clear of the ground. I could pick up on the back of the disk and help it and it would lift real high. I ordered a pump which should be here in a few days. I sure hope that fixes the problem. Starting to get real expensive $150.00 for the rebuild and $385.00 for the pump. If it doesn't work this time, if I want my wife to know, I will tell her. Good Luck, Don
 
Thanks for the info, I was afraid that was going to be the answer. But oh well, if it's gota be. Thanks, and thanks to all who have responded over the forum on different questions. Frank
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top