anyone have a #

tn terry t · Jul 5, 2008

i need the number for the wear ring that goes on the front crank pulley on a 56,230 with the 123 engine. my napa store cant seem to come up with the number :roll:

Wayne in MN · Jul 5, 2008

Look at this parts diagram; there is not an "wear ring" listed.
https://webparts.pvassociates.net/cnh/main.php

GA Dave · Jul 5, 2008

Click this link. Began search on bottom right. David...........http://www.caseih.com/parts/parts.aspx?navid=123&RL=ENNA&partid=481&typeid=157

Daniel H. · Jul 6, 2008

I believe the seal from Case/IH can be ordered with the wear sleeve. If you already have a seal, NAPA should be able to order a speedi-sleeve to fit the pulley. You have to measure the pulley:

Correct size selection requires that three measurements be taken and averaged. Measure the shaft diameter just ahead of the wear path (not in the track worn by the seal) at three positions: 12 – 6 o’clock, 2 – 8 o’clock and 2 – 10 o’clock. The average of these readings will compensate for an out of round shaft. Compare your average diameter with the size ranges in the Speedi-Sleeve Selection Charts, and choose the appropriate sleeve.

Here is the link to the sleeve sizes:

http://www2.vsm.skf.com/Files/Brochures_in_PDF/Speedi Sleeve.pdf

tn terry t · Jul 6, 2008

hey Thanks Daniel

tn terry t · Jul 6, 2008

http://public.catalog.external_link/js_data/5416.jpg

if anyone cares to know TISCO lists the seal and wear ring under the number 378193R91 thanks to all that replied

anyone have a #

tn terry t

Well-known Member

Wayne in MN

Well-known Member

GA Dave

Well-known Member

Daniel H.

Member

tn terry t

Well-known Member

tn terry t

Well-known Member

Similar threads