Too many I.H. Parts Need to sell some

Anonymous-0 · Jun 23, 2008

After grabbing parts and pieces off of 5 different I.H. tractors in the last two weeks, I find myself with duplicates that need to fill some needs of others. Or as wife and sons would say, get some of that shut out of here and trade or buy something you don't have. Have parts from many models all I.H, even have a few complete parts tractors to barter with. Sheet metal, narrow fronts, wide fronts, manifolds, carbs including gas start diesels, distributors and wheels and tires,emblems,injection pumps, etc etc. Just hate to see this stuff go to scrap if it can help somebody along on their project or family treasure. Call me or e-mail if you need something, I probably have it. Migraine

douglas carroll · Jun 23, 2008

I am looking for steel wheels for my F30, a tank for a 10-20, a wide front for a super c, starter for aa super MTA, let me know if you have any of these items please, thank you, steven douglas carroll, 209-404-2793

Mike Farmer · Jun 24, 2008

I need a Radiator shutter for a Farmall M. Prefer a good one but Even a repairable one will be ok. I am in the UK but obviously quite happy to pay cost of shipping. MTF

James Williams · Jun 24, 2008

Im looking for a tail light for a Farmall F12

jimmy

Anonymous-0 · Jun 24, 2008

hey, I've recently recieved an F14 and am looking for quite a few part, narrow front end, clutch pedal and foot rest(left side) governor(throttle) rod and bracket, brake covers(both sides), too much to list. My email is, [email protected] let me know if you can help, Thanks,Kent

Anonymous-0 · Jun 24, 2008

Hi Migraine, I for one think what your doing is great. Almost all the old bone yards around me are scrapping all their old stuff. I don't know what they are called but I have been looking a long time for the flat iron piece that goes from the touch control arm to the fast hitch on a super C. I also need the round part that connects the touch control to the fast hitch on the right side. Someone removed them from mine long befor I ever owned it.
Thanks,
Paul

bob farrell · Jun 24, 2008

Migraine - Need grill and side panels for a IH-424D. E-mail me please if you have same. Thanks ! bob Farrell

BOBM25 · Jun 24, 2008

I could use a set of wheels for my MTA. I'm looking for the correct "Z" casting centers specifically. If I remember right, you're up in the NW, though, aren't you. I wouldn't want to pay shipping on something that big, and its waaaaay to far to drive.

Andrew Kappers · Jun 24, 2008

Im looking for a exhaust manifold for a 450 Diesel and the hydraulic lines that run from the side of the battery box to the dash section between your feet when on the tractor and the hydraulic lines that run from the dash to the right hand front corner of the engine. They run right past the oil filter If I remember right. Thanks, andy

Evan350 · Jun 24, 2008

I can use a battery box and seat pan for a F-350 and the right and left side hood pieces (with the INTERNATIONAL logos still attached preferably) for a I-656.

jk · Jun 24, 2008

(quoted from post at 20:47:39 06/23/08) After grabbing parts and pieces off of 5 different I.H. tractors in the last two weeks, I find myself with duplicates that need to fill some needs of others. Or as wife and sons would say, get some of that shut out of here and trade or buy something you don't have. Have parts from many models all I.H, even have a few complete parts tractors to barter with. Sheet metal, narrow fronts, wide fronts, manifolds, carbs including gas start diesels, distributors and wheels and tires,emblems,injection pumps, etc etc. Just hate to see this stuff go to scrap if it can help somebody along on their project or family treasure. Call me or e-mail if you need something, I probably have it. Migraine

migraine- i need a few sheetmetal items for a 404, do u have anything that new?

Anonymous-0 · Jun 24, 2008

I am looking for a hood and a grill for a 1953 Farmall Super H. Thank you and have a good day!

Anonymous-0 · Jun 24, 2008

I'm looking for a seat assembly for an H. I would like to have the old style of flipover seat with a tool box on the seat support. I need the seat support as well as the seat.

Eric Bergstrom · Jun 24, 2008

I know it's a long shot, but do you have any tires for a McCormick W4? I'm almost certain they're 14.9-26, but they could be 14.9-28's.

Uhmech · Jun 24, 2008

Anything for a 560D. Hyd pump would be good. Mine is only putting out 500 psi

David Goode · Jun 24, 2008

I need two of the mounting hardware hooks for a Super M hood. If you happen to have acouple to spare.
-David Goode Coggon, IA

Anonymous-0 · Jun 25, 2008

I need a light switch for a Super H. Email me at [email protected]

CHIEFEAVES · Jun 25, 2008

Migriane, I could use a radiator shutter for a 1939 "M" along with the crank that opens and closes it. Also, I could use a choke and battery box cover for this tractor.
My E-mail is [email protected]
Thanks Harley

Anonymous-0 · Jun 26, 2008

This reminds me of "The Little Red Hen", when everyone volunteers to help eat the bread! (lol) But if you have any Super A parts- the under-seat tool box, a couple of rock shaft pin keepers (I guess they would be called that) and rock shaft pins, a 6 volt gen', a grill in good shape (fat chance, huh?)- I would like to participate in this cheese line, also! Oh, and a complete set of plows, cultivators, planter and a post-hole digger would be nice, too (lol).

Rad Red

new at this · Jul 2, 2008

Don't suppose you would happen to have a timing chain cover for a 606 gas? If yes at a reasonable price, I would consider nominating you for sainthood. Thanks

Too many I.H. Parts Need to sell some

Well-known Member

Member

Member

Well-known Member

Well-known Member

Well-known Member

Member

Member

Member

Member

Member

Well-known Member

Well-known Member

Member

New User

Member

Well-known Member

Member

Well-known Member

New User

Similar threads