Farmall 300 utility need advice on hydralic system

Eli McKeehan · Jun 8, 2008

Ok we took off the loader that was on the front of tractor, and we put on a 3pt sysem on the back. The ram we have has 2 hoses and I am needin to know where to hook the hoses? There are 2 plugs underneith the 3pt control lever, one in front and one in the back. Do my hoses go there? Also we have the orginal hoses that worked the front end loader, Do my hoses go there? Please help me!

Dellbertt · Jun 8, 2008

I have a stock 300U with snow plow on front and 3p on back. You should have 2 sets of valve controls on the right side of seat. Front is for snowplow and rear is for 3p. If you only have one set hook the 3p to it and see what happens.

Anonymous-0 · Jun 8, 2008

I am offering how mine is hooked up on my 300u in hopes it may help. I do have a loader on mine.
From the front pair of controls, the inside control,front opening on bottom goes to the loader (lift only, no down pressure with loader). The outside control,both openings on bottom are plumbed go to the bucket.
On the back, the inside is the control block, and on the outside control, both openings on top are plumbed to go to the 2 point cylinder.

Farmall 300 utility need advice on hydralic system

Eli McKeehan

New User

Dellbertt

Member

Anonymous-0

Well-known Member

Similar threads