QUESTION FOR REDMIST OR WHO EVER?

Anonymous-0 · Jun 7, 2008

YOU STATED IN A POST BELOW VALVE LASH SHOULD BE SET AT .017 WITH ENGINE WARM/HOT. WHAT SHOULD IT BE COLD. REPLACING RAD. IN MY M, AND CHECKING VALVES WHILE STEERING SHAFT IS OUT OF WAY. ALSO WAITING ON RAD. TO BE FIXED.

HossinMaine · Jun 7, 2008

Scott,when I set em I go 20 thou.After she warms up she"ll expand a bit and be bout right.Works for me but Ive been wrong before,;;;;;once,;;I think. Easily confused,Hoss

Red Mist · Jun 7, 2008

Scott: No more than .020" maximum. Again, my opinion only and others may feel differently, I'd say more like .018" on the intakes and .019" on exhaust - cold. They don't "lengthen" as much as you might think when they warm up to operating temperature. mike

Anonymous-0 · Jun 7, 2008

GUYS THANX FOR QUICK REPLY. I SET THEM AT ABOUT .017 TO .018. I'LL DOUBLE CHECK/RESET THEM TOMORROW.

QUESTION FOR REDMIST OR WHO EVER?

Anonymous-0

Well-known Member

HossinMaine

Member

Red Mist

Well-known Member

Anonymous-0

Well-known Member

Similar threads