carb kit

poorfarmall 1 · Jun 6, 2008

putting kit in distalate carb. , if i set floataccording to tractor supply directions , it wont even open. maybe tractor supply stuff is crap any one know thanks AGAIN!!!!!!!

magman · Jun 6, 2008

could be I also believe alot of the IT manuals are wrong on the adjustment too. Did you adjust it corectly? There must be a directions posted somewhere here.What is it an H , M ?
JON

rustyfarmall · Jun 6, 2008

Maybe you are measuring from the wrong place?

Red Mist · Jun 6, 2008

(quoted from post at 10:47:11 06/06/08) putting kit in distalate carb. , if i set floataccording to tractor supply directions , it wont even open. maybe tractor supply stuff is crap any one know thanks AGAIN!!!!!!!

I doubt if anything is wrong with the carb kit. mike

CNKS · Jun 6, 2008

Float is usually measured with the throttle body upside down. Usually roughly horizontal. If you adjusted it horizontal with the throttle body right side up, the needle is in the closed position.

poorfarmall 1 · Jun 6, 2008

its a h

carb kit

poorfarmall 1

Member

magman

Member

rustyfarmall

Well-known Member

Red Mist

Well-known Member

CNKS

Well-known Member

poorfarmall 1

Member

Similar threads