carb. setting for super c

Anonymous-0 · Jun 2, 2008

after getting carb. rebuilt I noticed that I did't know what the initial setting was for the carb. Can someone help me....

Thanks David

ScottyHOMeY · Jun 2, 2008

Most likely you have only one fuel screw, and that will be for the low idle fuel adjustment. It's possible you have a second one for load fuel. I either case, a good rule of thumb is to bottom it out gently, then back it out 1-1/2 turns. That will usually get it running, and you can adjust from there.

carb. setting for super c

Anonymous-0

Well-known Member

ScottyHOMeY

Well-known Member

Similar threads