1950 FARMALL M RADIATOR

Anonymous-0 · Jun 2, 2008

GUYS, THANKS FOR THE HELP IN REMOVING FRONT STEERING SHAFT. I DON'T MEAN TO BE DUMB , BUT I STILL CAN'T SEE HOW I CAN REMOVE RAD. BOLTS WITH OUT DROPPING MY FACTORY WIDE FRONT END.SORRY. IT HAS A 1/2 THICK STEEL PLATE ACROSS THE BOTTOM, FROM RAIL TO RAIL. ANY EXTRA HELP WOULD BE WELCOME. THANX SCOTT SWAIN

Mike Farmer · Jun 3, 2008

Sorry to tell you this. I've just had the same with H and that fronts got to come off. I dont know any other way MTF

Nebraska Cowman · Jun 3, 2008

probably not. Depending on the wide front that plate can be in the way. Sorry

RBTXS · Jun 3, 2008

I've removed and installed the radiator on my SMTA with a WFE. There is a hole in the boloster plate under each radiator bolt. I used a long extension (12" I think) to poke through the hole to acces the bolt head. I think an M is made the same way. Don't loose the rubber spacer pads and the springs and washers on the mounting bolts. Good luck.

1950 FARMALL M RADIATOR

Anonymous-0

Well-known Member

Mike Farmer

Member

Nebraska Cowman

Well-known Member

RBTXS

Member

Similar threads