Anonymous-0
Well-known Member
I have a 1958 International 340 and it has a bad flywheel If I unbolt it from engin will it just slide apart to get at flywheel looks very simple to me but dont know if Im right need some advise on this Thanks Ric
- Thread starter Anonymous-0
- Start date
tn terry t
Well-known Member
do you have the engine split way from the transmission ? if not i see no way of getting the flywheel out but ive been wrong before 
Anonymous-0
Well-known Member
No nothing apart thats my question is it easy to split apart looks like just unbolt and pull apart is that right Ric
not familiar with the 340 but generally they are not hard to split if you have the tools and equipment to handle them. I made split stands for my SMTA when I split it. I once split it by using the split stands on the front and suing a 3 ton floor jack chained to the tractor near the back end of the torque tube and pulling it apart that way. If you don't have the jacks and blocking to handle it get someone else to do it. If it falls on your toe or something worse you will wish you had. I also use bolts with the heads cut off to line up when reassembling. I would get a book on the tractor, at least IT before starting on it.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy